Metal Cut To Length Machine,Cut To Length Line,Steel Cutting Machine,Metal Cutting Machine

Simple Cutting-To-Length Line

Main Technical Datas:

Recoiler I.D: Φ508mm

Weight capacity of the recoiler: 15 Ton

Levelling roller material: 40Cr with surface harden HRC50-54

Levelling Speed: 0-24m/min

Length of the cutting sheet:300-4000mm

Levelling Tolerance: ±1.0mm/2000mm ( Length )

±1.5mm/2000mm ( Diagonal )

Electrical Source: 380V/50Hz/3Ph 

 Electrical Control System: Accord with GB Standard

-----------------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Simple Slitting Machine,Slitting Line,Metal Slitting Machine,Steel Slitting Line

 

0.5-2.0mm Simple Slitting Line

Main Technical Datas:

Material: бb≤380Mpa Carbon steel

Thickness: 0.5-3mm Width: 1600mm

Inner diameter of coil: φ508—φ610

Outer diameter of coil: φ1600mm. Max.

Weight of coil: 15 Ton. Max.

Diamter of slitting blades: φ240mm

Material of slitting blades: 40Cr

Strips Number: 13 strips

-------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Aluminum Embossing Machine,Metal Sheet Embossing Machine,Steel Embossing Machine

Aluminum Embossing Machine, Metal Sheet Embossing Machine

Main Technical Datas:Coil Material: Galvanized Steel Sheet, Aluminium Sheet
Thickness of material:0.16-0.8mm Sheet size: 700*900mm
Working Speed: 10-15m/min
 Roller Size: 400x1000mm
Main Motor Power: 11 KWThe Method of Controlling the Depth of Embossing Pattern: Screw reducer controlling accuratelyVoltage: 380 V3 Phase 50 Hz ( at buyer’s request )
Machine Weight: about 2 Ton

----------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Crimped Curving Machine,Roof Curving Machine,Roof Bending Machine,Cranking Machine

 

IBR Sheet Crimped Curving Machine, Roof Curving Machine,Roof Bending Machine,Cranking Machine

Main Technical Datas:
Raw material thickness: 0.3-0.6mm

Raw material width and length: according to customer's request
Working Speed: 0-10 m/min ( adjustable)
Main Power: 0.85 Kw, Hydraulic Power: 5.5 KW Roller material: High grade 45# forged steelShaft material: high grade 45# Steel with Diameter 75mm

Cutting Blade: Cr12 mould steel with quenched treatment




  ----------------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Corrugated Sheet Curving Machine, Sheet Curving Machine

 

Corrugated Sheet Curving Machine, Sheet

Curving Machine

Main Technical Datas:Material thickness: 0.4-0.7mm
Width of sheet: 1250mm
Diameter of principal axis: 120mm
Main Power: 11KW
Speed: 10m/min
Electrical Control System: PLC
PLC: Panasonic Brand
Voltage: 380V, 3 Phrase, 50Hz.

----------------------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Elbow Machine,Elbow Moulding Machine,Elbow Making Machine,Elbow Forming Machine

Elbow Machine,Elbow Moulding Machine,Elbow Making Machine,Elbow Forming Machine

Main Technical Datas:Curving Degree: 72 Degree with corrugation
Diameter: 100mm or 80mm or at buyer's requirement
Material: Black steel with thickness 0.4-1.5
G.I or Color G.I with thickness: 0.4-1.5mm
Stainless Steel with thickness 0.4-1.0mm
Aluminum with thickness: 0.4-1.5mm
Totally 13 [rocessing steps, means 13 sets of moulds needed, in the processing of forming, needing oil pressure and punching machine.
Speed: 90 pcs/h.
Customer should prepare Oil pressure & Punching Machine
---------------------------------------------------------------------------------------------------------
Contact Person: Monica Lee
Website: www.monicamachinery.diytrade.com
Email/MSN: lixiaohua_monica@hotmail.com
Skype: monica198614
Cell:+86-13524020929 

Bemo Panel Roll Forming Machine,Bemo Sheet Roll Forming Machine,Tapered Sheet Roll Forming Machine,Tapered Bemo Panel Roll Forming Machine

 

A. Layout of the machine

Uncoiling - Slitting & cutting - Feeding - Roll forming for one side - Roll forming for the other side - roll forming for the middle rib - Runout table - Curving

B. Description of the line:

²       Covered Width: 333-500mm

²       Thickness of material: 0.55-1.0mm PPGI, 0.7-1.2mm Aluminum

²       Forming Speed: 6-8m/min

²       Main power: 5.5KW

²       Forming Station: 14

²       Application: Roofing

²       Diamension of the machine: 6500x980x1300mm

²       Weight of the line: about 4.5 Ton 


---------------------------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Standing Seam Roof Panel Roll Forming Machine,Standing Seam Roll Forming Machine,Clip Lock Roll Forming Machine

 

Standing Seam Roll Forming Machine,Clip Lock Roll Forming Machine

Technical Datas:

u      Steel Sheet Thickness: 1mm

u      Covered Width: 400mm

u      Decoiler: Manual Decoiler

u      Capacity of Decoiler: 5 Ton

u      Forming Speed: 5-15m/min

u      Roller Groups: 15 stes main roller

u      Roller Material: CCr15 high grade steel with finish machining treatment, by high frequency quenched HRC58-62

u      Roller Diameter: 120mm

u      Principal Axis: 45# high grade steel with brewage treatment

u      Axis Diameter: 75mm

u      Chain Wheel Material: high grade steel with finish machining treatment, by high frequency quenched. Pitch 25.4, 13 Tooths

u      Main Power: 5.5 KW

u      Cutting: Hydraulic cutting

u      Cutter Material: Cr12 Mov, Quenched HRC58-62

u      Electricity Control System: Whole machine adopt Industry Computer PLC Control System.

u      PLC: Japanese Panasonic Brand

u      Touch Screen: Japnese Panasonic Brand

-----------------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Stud and Track Roll Forming Machine,Stud Roll Forming Machine,Track Roll Forming Machine,Light Steel Keel Roll Forming Machine

 

Machine: ZGSY-1063 Track Forming Machine, Stud Forming Machine, Runner FOrming Machine

Main Technical Data:
1. Forming Speed: 12m/min
2. Steps of roller: 14 steps
3. Power of main motor: 2.2 kw
4. Power of cutting motor: 2.2 kw
5. Hydraulic power: 12 MPa
6. Cutting: hydraulic cutting
7. Thickness of material: 0.5-0.8mm
8. Control system: PLC Computer system Machine Work Flowing:
Decoiler ---- Feeding Guide ---- Roll Forming ---- Cut-to-length ---- Run Out Table
_________________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Door Frame Roll Forming Machine,Steel Frame Roll Forming Machine,Rolling Door Track Roll Forming Machine

 

Machine: ZGSY-7000 Door Frame Roll Forming Machine, Window Frame Forming Machine

Specifications:
Machine Model: ZGSY-7000
Number of Stations: 15 ~ 17
Forming Speed: 8 ~ 10M/Min
Complete line consist of:
1.Uncoiler
2.Hydraulic Punching hole & angle
3.Roll forming main machine
4.Straightener
5.Automatic cutting machine
6.PLC control System
7.Products run out table
_________________________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Roller Shutter Roll Forming Machine,Shutter Door Roll Forming Machine,Rolling Shutter Door Roll Forming Machine

ZGSY-009 Roller Shutter Door Forming Machine, Rolling Shutter Slat Forming Machine,Shutter Door Forming Machine

A. Main Technical Data 1. Steel Sheet Thickness: 0.6-0.8mm
2. Covered Width: 82.3mm
3. Coil Width: 134mm
4. Decoiler: Manual Decoiler
5. Capacity of Decoiler: 3 Ton
6. Forming Speed: 5-15m/min
7. Roller Groups: 13 stes main roller
8. Roller Material: CCr15 high grade steel with finish machining treatment, by high frequency quenched HRC58-62
9. Roller Diameter: 120mm
10. Principal Axis: 45# high grade steel with brewage treatment
_________________________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Gutter Roll Forming Machine,Gutter Machine,K Gutter Roll Forming Machine,Half Round Gutter Roll Forming Machine

Machine: ZGSY-1003 Gutter Forming Machine, Square Gutter Forming Machine, Half Round Gutter Forming Machine, K Gutter FOrming Machine

The Gutter Roll Forming Machine is an important part for the drainage system for steel structured buildings. The gutter can be inside gutter and outside gutter. 1). Main Parameter:
1. Steel Material: Q235, Prepainted coil
2. Thickness of Material: 0.4-0.8mm
3. Feeding Width Max: 300mm
4. Capacity of Decoiler: 3Ton
5. Inner Diameter of the Coiler: 500-600mmm
6. Out Diameter of the Coiler: 1800mm
7. Roll Forming Steps: about 16 steps
8. Power of Main Motor: 3 Kw
9. Roll Forming Speed Max: 15m/min
10. Dimension( L X W X H ) :
Manual Decoiler: about 1.1mx1.8mx1.2m
Main Machine: about 8mx0.8mx1.2m
Runout Table: 4mx0.6mx0.8m 2). Machine Process
Manual Decoiler ---- Feeding Guide ---- Roll Forming ---- Length Measuring --- Hydraulic Cutting --- Runout Table
____________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Downpipe Roll Forming Machine,Downspout Roll Forming Machine,Rainspout Roll Forming Machine,Drainpipe Roll Forming Machine

Machine: ZGSY-7008 Downpipe Roll Forming Machine, Water Downpipe Forming Machine, Rainspout Forming Machine
1). Down pipe forming machine mainly consists of decoiler, roll forming system, cutting equipment, protective guard, hydraulic system, control system, and product supporter.
2). Curving pipe forming machine is the complementary equipment for down pipe forming machine. It can make curve for down pipe to meet the requirement of practical engineering projects.
3). Work Flow:
Decoiling-->Coil sheet guiding and feeding -->Roll forming --> Cut to length --> Product packaging
4). Main Technical Specification Seaming equipment
1. Suitable raw material: 0.4-0.82mm colored steel sheet
2. Main motor power: 3Kw; Hydraulic power: 7.5KW
3. Forming speed: 8-10m/min
4. Number of roll stand: About 20 stands
5. Control system: Mitsubishi PLC
6. Material of cutting die: Cr12 mold steel with quench treatment
7. Dimension of the machine: About 16000mm*1100mm*1200mm
5) Curving pipe forming machine Descriptions: This kind of machine mainly consists of decoiler,
Roll forming system, cutting equipment, hydraulic system, PLC control system
Run out table. And the curving pipe forming machine is the complementary
Equirement for this kind of machine, which can make curve for down pipe to meet
The requirement of practical engineering projects.
6). Main technical parameter:
Suit raw material: 0.5mm colored steel sheet
Total motor power: 10kw
Forming speed: 8-10m/min
Roll stand: About 25 stands
Cutter material: Cr12
______________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

K Span Roll Forming Machine,Super K Span Roll Forming Machine,No Girder Arched Roof Panel Roll Forming Machine

 

Machine: ZGSY-6003 No-Girder Curving Roof Panel Forming Machine, K-Span Roll Forming Machine, Super Span Roll Forming Machine

A). Technical Parameters:
1. Manual Decoiler: manual expansing, passive uncoil
2. Weight capacity of decoiler: 5T
3. Main motor power: 7.5 Kw
4. Hydraulic motor power: 5.5 Kw
5. Roll Stand: 13

6. uncoil width: 914mm
7. Thickness: 0.8-1.2mm
8. Machine Stand: Welded structure steel
9. Type of forming machine: single station with chain transmission
10. Material of roller: high grade 45# steel
11. Surface of roller coated with Chrome 0.05mm Thickness
12. Type of cutting: Hydraulic cutting
13. Material of Blade: Cr12
14. Heat treatment of cutting blade: HRC 58-60
15. Computer Adopt PLC control
16. Voltage: 380V, 3 Phase 50Hz ( or according to customers local requirement )
B). Technical Process:
Manual Decoiler ---- Feed with guide ---- roll forming ---- cut with fixed length ---- output with table-curve in site
C). Equipment
Manual decoiler, main roll forming machine, hydraulic cutting device, hydraulic station, PLC Control system, curving machine, auto seamer, output table
______________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Highway Guardrail Roll Forming Machine,W Beam Roll Forming Machine,Crash Barrier Roll Forming Machine,Twice Wave Roll Forming Machine,Thrice Wave Roll Forming Machine

Machine: TW-8001 Highway Guardrail roll forming machine, Guardrail Forming Machine, Crash Barrier Forming Machine
Comprised of decoiler, levelling, punching system, coil feeding machine, guider, roll forming machine, cutting system, collecting platform and the PLC controlling system
Technical parameter:
1. Matching material: Feed width: 480mm, forming thickness(2.0-3.2mm), Q235 galvanized steel strip
2. Material thickness: 2-3.2mm
3. Main motor power for forming: 22kw
4. Forming speed: 10-12m/min
5. Hydraulic station power: 11 kw
6. Roll forming stations: About 17
7. Hydraulic pressure: 20 mpa
8. Controlling system: PLC
9. Total weight: About 25 Ton Additional information:
Material of forming rollers: GCr15 bearing steel with quenched treatment
Material of cutter blade: Cr 12 mould steel with quenched treatment _________________________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Floor Deck Roll Forming Machine,Decking Floor Roll Forming Machine,Steel Deck Roll Forming Machine,Floor Decking Roll Forming Machine

ZGSY-8006 Floor Decking Roll Forming Machine, Floor Deck Roll Forming Machine, Steel Deck Structure Floor Panel Forming Machine

1. Technical Parameters: Material Spec: Galvanized steel sheet
Thickness of Coil Sheet: 0.8 --1.2 mm
Main Motor Power: 18.5kw
Forming Speed: 10--12m/min
Hydraulic Station Power: 3kw
Quantity of Stands: About 24 groups
Hydraulic Pressure: 10~12Mpa
Controlling System: PLC
Index Error of Length: 10m±2mm
Total Weight: About 1800kg
Voltage: 380V 3 phase 60Hz or at buyers requirement
2. Standard Equipment of Machine: Passive uncoiler 1pc Guiding equipment 1set
Rolling forming equipment 1set Main body 1set
Post-cut equipment 1set Hydraulic station 1pc
PLC controlling desk 1pc Supporter table 2pc
Security cover (optional) 1set ____________________________________________________________

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614

Furring Channel Roll Forming Machine,Top Hat Channel Roll Forming Machine,Omega Profile Roll Forming Machine,U Channel Roll Forming Machine

  

Furring Channel Roll Forming Machine,Top Hat Channel Roll Forming Machine,U Channel Roll Forming Machine

A)    Summary

²       Material: G.i Coil or Carbon steel

²       Material Thickness:1.55-2 mm

²       Decoiler: Manual type with 3 Ton weight capacity

²       Main Power: 7.5KW

²       Forming Station: 14

²       Punching: hydraulic punching, before forming

²       Cutting: hydraulic cutting, after forming

²       Machine Diameter: about 8500mm(L)x1000mm(W)x1300mm (H)

²       Weight of machine: about 6 Ton 

B) Main Parts

²       Manual Decoiler ---------------------------------------- 1 unite                    

²       Feeding Guide ------------------------------------------ 1 unite

²       Punching Device --------------------------------------- 1 Unite          

²       Roll Forming System ---------------------------------- 1 unite            

²       Hydraulic Cutting --------------------------------------- 1 unite      

²       Hydraulic Station ---------------------------------------- 1 unite

²       PLC Contol System -------------------------------- ---- 1 unite

²       Run-out Table --------------------------------------------- 1 unite

C).Working Flowing

Manual Decoiler ---- Feeding guide ---- Punching ---- Roll Forming ---- Cutting ---- Run out table

-----------------------------------------------------------------------------------------------

Company: Wuxi Techwell Machinery Manufacturing Co.,Ltd

Website: www.wxtechwell.com

Tel: 0086-510-83133431

Fax: 0086-510-83133431

Contact Person: Monica Lee

Mobile: 0086-18018304331

Email: monica@wxtechwell.com

MSN: lixiaohua_monica@hotmail.com

SKype: monica198614